PWR2IEC 2 Port IEC Power Controller
                            FW Version: V1.1.0

================================= System Information Commands
?/HELP                            Print Help Information
STATUS                            Print System Status And Port Status
OUTLETSTATUS xx                   Print Outlet xx ON/OFF
                                  xx = 0 All, 1 Outlet1, 2 Outlet2
CONNSTATUS xx                     Print Outlet xx Idle/Connected/Overload/Abnormalvolt
                                  xx = 0 All, 1 Outlet1, 2 Outlet2
ELESTA                            Print All Outputs Electricity Level Information
FWVERSION                         Print FW Version And GUI Version
================================= System Control Commands
DEVICENAME:xx                     Set Device Name To xx
PON/OFF                           Set System Power ON Or OFF
RELAY ON/OFF                      Set System RELAY Control ON Or OFF
KEY ON/OFF                        Set System Key Control ON Or OFF
RESET                             Reset System To Default Setting(Type "Yes" To Confirm, "No" To Discard)
REBOOT                            Set System Reboot And Apply New Config!!!
RESTA                             Set System Restart
SETCURRENTTHRESHOLD xx            Set The System Current Threshold To xx(xx to one decimal place at most)
                                  xx = 0.0 : 10.9
OCDT xx                           Print Outlet xx OverCurrent Delay Time
                                  xx = 0 All, 1 Outlet1, 2 Outlet2
OCDT xx DEL yy                    Set Outlet xx OverCurrent Delay Time To yyms(Default: No Delay)
                                  xx = 0 All, 1 Outlet1, 2 Outlet2
                                  yy = 0 No Delay, 1 100, 2 200, 3 300, 4 400, 5 500
SETOVERVOLTAGETHRESHOLD xx        Set The System OverVoltage Threshold To xxV(Default: 250V)
                                  xx = 198 : 264
SETUNDERVOLTAGETHRESHOLD xx       Set The System UnderVoltage Threshold To xxV(Default: 189V)
                                  xx = 189 : 249
SAFEMODE xx                       Set The System Safe Mode To xx When Overloaded
                                  xx = 0 Outlet_Shutdown, 1 System_Shutdown, 2 Auto_Retry
OVERLOADRETRYCNT xx               Set The System Retry Number To xx When Overloaded(Default: 1)
                                  xx = 1 : 3
[ERROR]Command Not Found.
OVERLOADRETRYTIME xx              Set The System Retry Delay Time To xxmins When Overloaded(Default: 3mins)
                                  xx = 1 : 10
VOLTMONITORMODE xx                Set The System Voltage Monitor Mode To xx When Overvoltage Or Undervoltage
                                  xx = 0 All_Outlets_Shutdown, 1 Auto_Retry
VOLTMONITORRETRYTIME xx           Set The System Retry Delay Time To xxmins After the Voltage Input Stabilises(Default: 3mins)
                                  xx = 1 : 10
STANDBYMODE xx                    Set The System Standby Mode To xx
                                  xx = 0 All_Standby_Mode, 1 Sleep_Mode
RELAYMODE xx                      Set The System Relay Mode To xx
                                  xx = 0 Dry_Contact, 1 Push_Button
RELAYVOLTAGE xx                   Set The System Relay Toggle Voltage To xx
                                  xx = 0 Low_Voltage, 1 High_Voltage
BEEPERTIME xx                     Set The Buzzer Sound Time To xxs When Alarming(Default: 10 Seconds)
                                  xx = 0 : 9999
OUTLETTIMEON xx:yy                Set Outlet xx Power_ON Delay To yys
                                  xx = 1 Outlet1, 2 Outlet2
                                  yy = 2 : 9999
OUTLETTIMEOFF xx:yy               Set Outlet xx Power_OFF Delay To yys
                                  xx = 1 Outlet1, 2 Outlet2
                                  yy = 0 : 9999
RESTADELAY xx:yy                  Set Outlet xx Power_RESTA Delay To yys
                                  xx = 1 Outlet1, 2 Outlet2
                                  yy = 2 : 9999
OUTLETELERESET xx:yy              Set Outlet xx Electrical Work Reset Duration To yys(Default: 10 Seconds)
                                  xx = 1 Outlet1, 2 Outlet2
                                  yy = 0 : 9999
OUTLETTHRESHOLD xx:yy             Set Outlet xx Current Threshold To xxA(Default: 0A)
                                  xx = 1 Outlet1, 2 Outlet2
                                  yy = 0 : 10
ALLOUT ON/OFF                     Set All Outlets ON/OFF
OUTLET xx ON/OFF/RESTA            Set Outlet xx ON/OFF/RESTA
                                  xx = 1 Outlet1, 2 Outlet2
RSALLOUTELE                       Clean Up All Outlets Electrical Work
RSOUTELE xx                       Clean Up The Outlet xx Electrical Work
                                  xx = 1 Outlet1, 2 Outlet2
SYSTIME                           Get The Time For The System
RESYSTIME yyyy-mm-dd;hh:mm:ss     Set The Time For The System
                                  yyyy = Year, mm = Month, dd = Day, hh = Hour, mm = Minute, ss = Second
================================= RS232 Control Commands
RS232OUT y:z:c:a                  Send y Type Of Command a With Baud Rate z, Parity c To Output
                                  y=a: ASCII
                                  y=h: HEX
                                  z=1: 2400
                                  z=2: 4800
                                  z=3: 9600
                                  z=4: 19200
                                  z=5: 38400
                                  z=6: 57600(Default)
                                  z=7: 115200
                                  c=1: None
                                  c=2: Even
                                  c=3: Odd
                                  a=RS232 Command
RS232BAUD z                       Set RS232 Baud Rate To xx
                                  z = 1 - 2400, 2 - 4800, 3 - 9600, 4 - 19200, 5 - 38400, 6 - 57600(Default), 7 - 115200
================================= Network Control Commands
NET TCP/IP LIST                   List Current TCP/IP Address
NET TCP/IP ENABLE xx              Set TCP/IP xx Enable(Only One Can Be Enabled)
                                  xx = 1 TCP/IP1, 2 TCP/IP2
NET TCP/IP1 DHCP ON/OFF           Set TCP/IP1 Auto IP(DHCP) ON Or OFF
NET TCP/IP1 IP xxx.xxx.xxx.xxx    Set TCP/IP1 IP Address
NET TCP/IP1 GW xxx.xxx.xxx.xxx    Set TCP/IP1 Gateway Address
NET TCP/IP1 SM xxx.xxx.xxx.xxx    Set TCP/IP1 Subnet Mask Address
NET TCP/IP2 DHCP ON/OFF           Set TCP/IP2 Auto IP(DHCP) ON Or OFF
NET TCP/IP2 IP xxx.xxx.xxx.xxx    Set TCP/IP2 IP Address
NET TCP/IP2 GW xxx.xxx.xxx.xxx    Set TCP/IP2 Gateway Address
NET TCP/IP2 SM xxx.xxx.xxx.xxx    Set TCP/IP2 Subnet Mask Address
NET MDNS ON/OFF                   Set mDNS ON/OFF
NET RB                            Set Network Reboot And Apply New Config
====================================================================================================